#592 Cable Ladders
LSC’s professional cable ladder is the finest available.  The newly improved ladder is constructed of ¼" (7x19) stainless steel cable with ¾" x 18-guage titanium tubing for rungs.  Each rung is fully diamond knurled for increased grip.  Rungs are swaged onto the ladder cables with titanium compression plugs.  This unique design provides for a very low profile swage.  Rung slippage on the cable occurs at over 1,500 lbs.  Stainless steel thimbles are located at the end of each cable to allow attachment to the aircraft or the addition of another cable ladder.  Click photo for larger image.

• Low profile rung swages.

• Corrosion resistant.

• Rung offsets are 12" apart.

• Weight:  #592-30 @ approx. 13.0 lbs
               #592-45 @ approx. 19.3 lbs

• Custom lengths available.

#592-30 Cable Ladder, ¼" x 30'
#592-45 Cable Ladder, ¼" x 45'

#592 Cable Ladder

#580 Survivor Simulator
Field proven design is a durable and economical training aid for rescue swimmer programs and other in-water training requirements.  Constructed from 1050 denier ballistics nylon casing, closed-cell flotation, and corrosion resistant hardware.  The unit is able to withstand repeated helicopter deployment/drops into water from heights of up to 50 ft.  Simulator is suitable for SADPU recovery, and is equipped with MADPU lifting ring.  Click photo for larger image.

• High visibility intl. orange side gussets and arms.

• Retro-reflective markings on chest/back, shoulders and arms.

• Stainless steel snap hooks for attachment of light sticks.

• Simulator folds in half for compact stowage and features attached shoulder strap for easy transport.

• Device floats upright simulating an adult person treading water.  Resists drift from rotor-wash and wind.

• Fast draining/drying design.

• Approximate weight:  26 lbs. 
  Stowed dimensions:  18" L x 20½" W x 6" H

#580 Survivor Simulator

#214 Quick Strop
Originally designed for the US Coast Guard, the LSC Quick Strop is now available to all rescue activities.  Constructed of MIL-SPEC webbing and stainless steel hardware, the Quick Strop provides a quick, safe means of hoisting uninjured personnel.  The Strop can be placed under the arms, around the back, or over the head of the survivor in one quick motion.  To prevent the survivor from slipping out, a slide buckle is slid down the Strop and attached to an adjustable crotch safety strap which is stored in a zipper pocket on the rear of the Strop.  Instructions and pictorials are printed on the Strop.  Approved for use by the US Coast Guard.  Click photo for larger image.

Specification Sheet (click to download) available in Adobe PDF format.

#214 Quick Strop

#216 Rescue Strop
The Rescue Strop is used to hoist uninjured Military personnel during helicopter operations.  The Strop is placed under the arms and across the back; the safety strap located on the outside is pulled loose, placed over the arms, under the front of the Strop and attached across the front of the chest and adjusted to a snug fit.  The arms must remain down to prevent possible slippage during hoisting.  Pictorials are printed on the Strop.  Personnel must be trained in the proper and safe use of this item.  The Rescue Strop is designed to be unaffected by repeated use in the marine environment; constructed of nylon, closed-cell foam and stainless steel hardware.  Restricted to military use by trained personnel only.  NSN 1680-01-347-4946.  Click photo for larger image.

Specification Sheet (click to download) available in Adobe PDF format.

#216 Rescue Strop