|
Replacement
CO2 Cylinders
Replacement CO2
cylinders used in inflatable life vests. Replace with cylinder
of the same CO2 mass (weight) and thread size. Click photo for larger
image.
#540
16 grams, 3/8" threads
#351 24 grams, 1/2" threads
#350 25 grams, 3/8" threads
#472 29 grams, 1/2" threads (Mil-Spec)
#484 33 grams, 1/2" threads
|
CO2 Cylinder
|
|
|
#HI015 Replacement Safety/Lock Pin
- Red
Safety/lock pin used to
secure the manual firing lever of Halkey Roberts manual inflators (HR 840AM
series) and Halkey Roberts automatic inflators (HR V8500
series). Locking pin is broken upon manual activation of the
firing lever. Use only if the inflatable life vest was
originally supplied with this type of pin. Click photo for larger
image.
|
#HI015 Safety Pin, Red
|
|
|
#HI017 Replacement Safety/Lock Pin
- Green
Safety/lock pin used to
secure the manual firing lever of Halkey Roberts manual inflators (HR 840AM
series) and Halkey Roberts automatic inflators (HR V8500
series). Locking pin is broken upon manual activation of the
firing lever. Use only if the inflatable life vest was
originally supplied with this type of pin. Click photo for larger
image.
|
#HI017 Safety Pin, Green
|
|
|
#474 Super Bobbin for
Halkey-Roberts Auto-Inflator
Replacement bobbin for Halkey Roberts automatic inflators (HR V8500
series). Use only if the inflatable life vest was
originally supplied with the Halkey Roberts Auto Inflator and
bobbin. Click photo for larger
image.
|
#474 Super Bobbin
|
|
|
#479 Replacement Gasket
Set, Inflator Installation
Gasket set used to install
manual & automatic inflators to the valve stems of inflatable
life vests. Set includes upper (thin) and lower (thick)
gaskets.
|
NO IMAGE
AVAILABLE
|
|
|
Replacement
Cylinder Seat Gaskets
These are the gaskets
inside the inflator mechanisms and which the CO2 cylinders are
seated against.
#484-S Gasket, 1/2" Cylinder Seat
#488-S Gasket, 3/8" Cylinder Seat
|
NO IMAGE
AVAILABLE
|
|
|
#471
Rearming Tablets for Secumatic 3001S Inflator
Card consists of 10 pieces
of water soluble tablets/pills. For use with automatic
inflatable life vests featuring the Secumatic 3001S mechanism.
|
#471 Replacement Pills
|
|
|
#470-1 Safety/Lock Pin
for Secumatic 3001S Inflator
Safety/lock pin used to
secure the manual firing lever of the Secumatic™ 3001S Auto
Inflator. Locking pin is broken upon manual activation of the
firing lever. Click photo for larger
image.
|
#470-1 Safety Pin
|
